How To Reset Linksys Extender? A Quick Guide Here!

Linksys extenders are an excellent method to improve your Wi-Fi signal and increase the range of your wireless network. However, like any technological item, they might occasionally develop problems that necessitate a reset. Knowing how to reset your Linksys extender is vital for resolving connectivity issues, altering network settings, or preparing to sell or give away your equipment.

In this blog, you will get to know how to reset Linksys extender. We’ll go over both gentle and hard reset techniques, when to utilize each one, and how to get your extender back up and running properly afterwards.

Why Reset Linksys Extender?

Before we get started with the reset procedure, let’s go over why you might need to reset Linksys extender.

Connectivity Issues: If your extender is no longer connected to your router, or if the signal is weak or inconsistent, a reset may repair the problem.

Forgotten Password: If you have forgotten your extender’s admin password, the simplest method to recover access is to reset it to factory defaults.

Configuration Errors: Incorrect settings might cause your extender to fail. Resetting allows you to restart from scratch using the default settings.

Selling or Giving Away the Extender: If you intend to sell or give away your Linksys extender, resetting it assures that your personal settings and data are erased.

Firmware Issues: Occasionally, a firmware upgrade may not go as anticipated, resulting in instability. A reset can assist to restore functionality.

Types Of Reset To Linksys Extender

You can execute two sorts of resets on a Linksys extender: soft reset and hard reset. Each has unique repercussions, therefore it’s critical to grasp the distinction.

Soft Reset

It simply reboots the device, which can address small issues without wiping off your settings.

When To Use:

Minor connection difficulties.
Basic troubleshooting.
Attempting to re-establish connection while preserving custom setups.

Steps For Soft Reset Linksys Extender:

Unplug the Extender: Remove the extender from its power source.
Wait: Unplug it for 10-15 seconds.
Plug it back in: Reconnect the extension to the power outlet.
Wait for Reboot: Allow the extender to fully start up, which may take a few minutes.

Following a soft reset, your extender should maintain all of its prior settings and configurations.

Hard Reset

A hard reset returns the extension to its original factory settings. This implies that all of your Linksys extender setup, including the Wi-Fi network name (SSID), passwords, and other custom settings, will be deleted.

When To Use:

I’ve forgotten my administrator password.
Sell or give away the gadget.
Significant connection or configuration concerns.
Following unsuccessful firmware upgrades.

Steps For Hard Reset Linksys Extender:

Locate the Reset Button: On most Linksys extenders, the reset button is a tiny, recessed button located on the device’s side or bottom. You may need a paperclip or another item to push it.
Press and Hold the Reset Knob: Hold the reset knob.
Wait For The Extender to Reboot: Release the knob once the LED on extender begin to blink. This means that the device is restarting.
Reconfigure Your Extender: Once restarted, the extender will be reset to factory defaults. You’ll need to set it up again, just as you did when it was new. This involves reconnecting it to your router, creating a new Wi-Fi name and password, and reconfiguring any previous custom settings.

Reconfigure Your Linksys Extender After a Reset

After doing a hard reset, you must reconfigure your extender to communicate with your home network:

Plug in the Extender: Connect your Linksys extender to a power outlet that is within range of your current Wi-Fi network.
Connect to the Extender’s Network: On your computer or mobile device, navigate to the list of accessible Wi-Fi networks and choose “Linksys Extender Setup” or a similar name.
Open a Browser: Once connected, use a web browser and type “http://extender.linksys.com” into the address bar. This will direct you to the extender’s configuration page.
Follow The Onscreen Instructions: The Linksys extender setup page will take you over the steps of joining the extender to current WiFi. You will need to pick your Wi-Fi network from a list, enter your password, and give the expanded network a name.
Complete The Setup: After configuring the settings, save them and reboot the extender. Once completed, your extender should be fully functioning and able to increase the range of your Wi-Fi network.

Tips for Successful Resets and Reconfiguration

Placement is Critical: Make sure your extender is within range of your router yet near to the region where you need more coverage.
Best Place: The best position is often midway between your router and the region with weak signal.
Firmware Updates: After the reset, check for any accessible firmware apprises for your extender.
Strong Keywords: When reconfiguring your extender, use a strong and unique keyword for both the admin panel and the WiFi network to increase security.
Avoid Intrusion: Keep your extender away from latent sources of intrusion and other electrical equipment that might interrupt the signal.

Final Thoughts

Resetting your Linksys extender is a simple operation that can cure a variety of difficulties, including connection problems and forgotten passwords. Remember that following a hard reset, you will need to reconfigure your extender, which you can accomplish quickly and efficiently using the suggestions provided.

Following these procedures will guarantee that your Linksys extender continues to offer the robust, consistent Wi-Fi coverage you require across your home or workplace.